Difference between revisions of "Open Source Weather Station"

From Pabut
Jump to navigation Jump to search
Line 1: Line 1:
 
Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so not support material required.
 
Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so not support material required.
[[File:Shield-parametric.png]]
+
[[File:Shield-parametric.png|200px]]
[[File:Shield-parametric-b.png]]
+
[[File:Shield-parametric-b.png|200px]]

Revision as of 19:20, 8 September 2020

Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so not support material required. Shield-parametric.png Shield-parametric-b.png