Difference between revisions of "Open Source Weather Station"

From Pabut
Jump to navigation Jump to search
Line 3: Line 3:
 
[[File:Shield-parametric.png|600px]]
 
[[File:Shield-parametric.png|600px]]
 
[[File:Shield-parametric-b.png|600px]]
 
[[File:Shield-parametric-b.png|600px]]
 +
[[File:Solar shield photo.jpg|600px]]

Revision as of 19:24, 8 September 2020

Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so not support material required.

Shield-parametric.png Shield-parametric-b.png Solar shield photo.jpg