Difference between revisions of "Open Source Weather Station"

From Pabut
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so not support material required.
+
Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so no support material required. - [[Media:Shield-parametric.scad|SCAD FILE]] - [[Media:Shield.stl|LAYER STL]] - [[Media:Shield-top.stl|TOP STL]]
  
 
[[File:Shield-parametric.png|600px]]
 
[[File:Shield-parametric.png|600px]]
 
[[File:Shield-parametric-b.png|600px]]
 
[[File:Shield-parametric-b.png|600px]]
 
[[File:Solar shield photo.jpg|600px]]
 
[[File:Solar shield photo.jpg|600px]]

Latest revision as of 11:56, 10 September 2020

Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so no support material required. - SCAD FILE - LAYER STL - TOP STL

Shield-parametric.png Shield-parametric-b.png Solar shield photo.jpg