Open Source Weather Station

From Pabut

Revision as of 19:18, 8 September 2020 by Pabut (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so not support material required.

Retrieved from "http://pabut.org/wiki/index.php?title=Open_Source_Weather_Station&oldid=133"