Open Source Weather Station

From Pabut
Revision as of 19:13, 8 September 2020 by Pabut (talk | contribs) (Created page with "Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so not support material required.