Open Source Weather Station

From Pabut
Revision as of 11:56, 10 September 2020 by Pabut (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so no support material required. - SCAD FILE - LAYER STL - TOP STL

Shield-parametric.png Shield-parametric-b.png Solar shield photo.jpg