Difference between revisions of "The MULTIRX project"
Jump to navigation
Jump to search
| Line 19: | Line 19: | ||
sudo apt-get install cmake libboost1.49-all-dev libcppunit-1.13-0 libcppunit-dev libfftw3-3 libfftw3-bin libfftw3-dev swig python-cheetah python-numpy libasound2-dev | sudo apt-get install cmake libboost1.49-all-dev libcppunit-1.13-0 libcppunit-dev libfftw3-3 libfftw3-bin libfftw3-dev swig python-cheetah python-numpy libasound2-dev | ||
| + | <!-- | ||
== Process == | == Process == | ||
* Install GNURADIO and the gr-osmosdr block. Install the rtl-sdr applications so you can do some low level debugging is necessary | * Install GNURADIO and the gr-osmosdr block. Install the rtl-sdr applications so you can do some low level debugging is necessary | ||
sudo apt-get install gnuradio gnuradio-dev gr-osmosdr rtl-sdr | sudo apt-get install gnuradio gnuradio-dev gr-osmosdr rtl-sdr | ||
| + | --> | ||
Revision as of 20:00, 10 April 2016
An RTL-SDR Receiver capable of capturing, streaming and recording multiple channels at once. Inspired by volunteer first responders that wanted an easy way to monitor local public service channels when not near a radio and review recordings of radio transmissions after an event
System contains:
- NooElec NESDR Mini2 - RTLSDR USB
- 2016-03-18 Raspbian Jessie
- gr-osmosdr sdr.osmocom.org
- GNURADIO gnuradio.org
Dependencies
- git
- cmake (>= 2.6.3)
- boost (>= 1.35)
- cppunit (>= 1.9.14)
- fftw3f (>= 3.0.1)
- python (>= 2.5)
- swig (>= 1.3.31)
- numpy (>= 1.1.0)
sudo apt-get install cmake libboost1.49-all-dev libcppunit-1.13-0 libcppunit-dev libfftw3-3 libfftw3-bin libfftw3-dev swig python-cheetah python-numpy libasound2-dev
