Open Source Weather Station: Difference between revisions
Jump to navigation
Jump to search
Created page with "Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then..." |
No edit summary |
||
| Line 1: | Line 1: | ||
Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so not support material required. | Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so not support material required. | ||
[[File:Shield-parametric.png]] | |||
[[File:Shield-parametric-b.png]] | |||
Revision as of 19:18, 8 September 2020
Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so not support material required.
