Open Source Weather Station: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
[[File:Shield-parametric.png|600px]] | [[File:Shield-parametric.png|600px]] | ||
[[File:Shield-parametric-b.png|600px]] | [[File:Shield-parametric-b.png|600px]] | ||
[[File:Solar shield photo.jpg|600px]] | |||
Revision as of 19:24, 8 September 2020
Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so not support material required.
Error creating thumbnail: File missing Error creating thumbnail: File missing Error creating thumbnail: File missing
