Open Source Weather Station: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so | Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so no support material required. - [[Media:Shield-parametric.scad|SCAD FILE]] - [[Media:Shield.stl|LAYER STL]] - [[Media:Shield-top.stl|TOP STL]] | ||
[[File:Shield-parametric.png|600px]] | [[File:Shield-parametric.png|600px]] | ||
[[File:Shield-parametric-b.png|600px]] | [[File:Shield-parametric-b.png|600px]] | ||
[[File:Solar shield photo.jpg|600px]] | [[File:Solar shield photo.jpg|600px]] | ||
Latest revision as of 11:56, 10 September 2020
Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so no support material required. - SCAD FILE - LAYER STL - TOP STL
Error creating thumbnail: File missing Error creating thumbnail: File missing Error creating thumbnail: File missing
