Difference between revisions of "Open Source Weather Station"
Jump to navigation
Jump to search
Line 1: | Line 1: | ||
Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so not support material required. | Here is the 3D printed Solar Shield / Environmental protection for the Temperature Sensor. It's designed to fit on a 1/2" PVC pipe. Each layer is individually printed and then glued together so not support material required. | ||
− | [[File:Shield-parametric.png| | + | [[File:Shield-parametric.png|600px]] |
− | [[File:Shield-parametric-b.png| | + | [[File:Shield-parametric-b.png|600px]] |