Configure port mirror on a Catalyst 2950

From Pabut
Jump to navigation Jump to search

excerpt from the [Cisco Website] 

C2950#configure terminal
C2950(config)#
C2950(config)#monitor session 1 source interface fastethernet 0/2

!--- This configures interface Fast Ethernet 0/2 as source port.

C2950(config)#monitor session 1 destination interface fastethernet 0/3

!--- This configures interface Fast Ethernet 0/3 as destination port.

C2950(config)#

C2950#show monitor session 1
Session 1
---------
Source Ports:
    RX Only:       None
        TX Only:       None
        Both:          Fa0/2
Destination Ports: Fa0/3
C2950#
Retrieved from "http://pabut.org/wiki/index.php?title=Configure_port_mirror_on_a_Catalyst_2950&oldid=16"