Difference between revisions of "Configure port mirror on a Catalyst 2950"
Jump to navigation
Jump to search
(Created page with "excerpt from the http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015c612.shtml#topic5 Cisco Website C2950#configure terminal C2950(con...") |
(No difference)
|
Latest revision as of 11:47, 14 January 2015
excerpt from the [Cisco Website]
C2950#configure terminal C2950(config)# C2950(config)#monitor session 1 source interface fastethernet 0/2 !--- This configures interface Fast Ethernet 0/2 as source port. C2950(config)#monitor session 1 destination interface fastethernet 0/3 !--- This configures interface Fast Ethernet 0/3 as destination port. C2950(config)# C2950#show monitor session 1 Session 1 --------- Source Ports: RX Only: None TX Only: None Both: Fa0/2 Destination Ports: Fa0/3 C2950#