Configure port mirror on a Catalyst 2950

From Pabut
Revision as of 11:47, 14 January 2015 by Pabut (talk | contribs) (Created page with "excerpt from the Cisco Website C2950#configure terminal C2950(con...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

excerpt from the [Cisco Website]

C2950#configure terminal
C2950(config)#monitor session 1 source interface fastethernet 0/2

!--- This configures interface Fast Ethernet 0/2 as source port.

C2950(config)#monitor session 1 destination interface fastethernet 0/3

!--- This configures interface Fast Ethernet 0/3 as destination port.


C2950#show monitor session 1
Session 1
Source Ports:
    RX Only:       None
        TX Only:       None
        Both:          Fa0/2
Destination Ports: Fa0/3